Power Manager; Operating The Appliance; Switching The Appliance On And Off; Setting The Heating Function And Temperature - Bosch HLS79W3 0U Series Instruction Manual

Free standing cooker
Table of Contents

Advertisement

hPower manager
You can use the power manager to set the total power
P o we r
m anag e r
of the hob.
The hob is preset at the factory. You can use the
power manager to change the value in accordance
with the requirements for the relevant electrical
installation.
In order not to exceed this set value, the hob
automatically distributes the power available between
the cooking zones that are switched on.
As long as the power manager function is activated, the
output of a cooking zone may temporarily fall below the
nominal value. If a cooking zone is switched on and the
power limit is reached,
display for a short time. The appliance automatically
regulates and selects the highest possible power level.
For more information about how the total power of the
hob is changed, see section ~ "Basic settings"
appears in the heat setting
¬

1Operating the appliance

Y ou have already learnt about the controls and how
O p e r a t i n g t h e a p p l i a n c e
they work. Now we will explain how to apply settings on
your appliance.

Switching the appliance on and off

Use the function selector to switch the appliance on or
off. Turning the function selector to any position other
than the "Off" position switches on the appliance. To
switch off the appliance, always turn the function
selector to the "Off" position.

Setting the heating function and temperature

The function selector and temperature selector make it
very easy to apply the settings you require to your
appliance. To find out which heating function is best for
which type of food, please refer to the beginning of the
instruction manual.
Example in the picture: Top/bottom heating
190 °C.
Use the function selector to set the heating function.
1.
Use the temperature selector to set the temperature
2.
or grill setting.
The appliance will start heating after a few seconds.
Once your food is cooked, turn the function selector to
the "Off" position to switch the appliance off.
You can set both a cooking time and an end time
Note:
on the appliance. ~ "Time-setting options" on page 23

Power manager

en
at
%
29

Advertisement

Table of Contents
loading

Table of Contents