Plug In And Turn On - Epson PowerLite6110i Quick Setup Manual

Plug in and turn on

Connect the power cord to the projector and plug the other end

into an electrical outlet.

The

Turn on your computer or video source.

Press the

The projector beeps, the

projector lamp comes on in about 5 seconds. The

light stays green.

Start your video or presentation. If you have connected more

than one video source, use the Source Search button on the

projector or remote control to select the one you want to watch.

If your image does not appear on the screen, see the

NOTE

"Troubleshooting" section for help.

Turning off the projector

If you're using a computer, shut it down first, while you can

still see the display.

Press the

When you see the confirmation message, press the

button again. The projector beeps twice and the

light turns orange.

With Epson's Instant Off

period. When you're done, just unplug the projector.

Power light on the projector turns orange.

Power light

Power button on the projector or remote control.

Power light flashes green, and the

technology, there's no cool-down

Power

Table of Contents