Plug In And Turn On; Turning Off The Projector - Epson PowerLite 77c Quick Setup Manual

4

Plug in and turn on

1
Open the A/V Mute slide (lens cover).
2
Connect the power cord
to the projector and plug
the other end into an
electrical outlet.
The Power light on the projector turns orange.
3
Turn on your computer or video source.
4
Press the
or remote control. The projector beeps, the
Power light flashes green, and the projector
lamp comes on in about 5 seconds. The
Power light stays green.
5
Start your video or presentation. If you have connected more
than one video source, use the Source Search button on the
projector or remote control to select the one you want to watch.
I f your image does not appear on the screen, see the
NOTE
Troubleshooting section for help.

Turning off the projector

1
If you're using a computer, shut it down first, while you can still
see the display.
2
Press the
3
When you see the confirmation message, press the
button again. The projector beeps twice and the
turns orange.
With Epson's Instant Off
period. When you're done, just unplug the projector and it's
ready to travel.
Power button on the projector
Power button on the projector or remote control.
technology, there's no cool-down
®
Power
Power light