Setting Up Digital Signal Input; Setting Up Digital Channels - Tektronix MSO5000 Series User Manual

Acquisition

Setting Up Digital Signal Input

Use Digital setup menus to set up the digital channels to acquire signals. Digital channels are available on MSO70000/C and
MSO5000 Series instruments only.
1. Connect the logic probe to the instrument.
2. Connect the probe to the input signal
sources.
CAUTION. To prevent damage to the
instrument always wear an antistatic wrist
strap when making connections to the
instrument and observe the maximum input
voltage ratings for input connectors.
3. Set up digital channels and buses using
the Digital menus.
(See page 48, Setting Up Digital Channels.)
and (See page 50, Setting Up a Bus.)

Setting Up Digital Channels

You can set a digital channel threshold, size, position and label on MSO70000/C and MSO5000 Series instruments.
1. Select Digital > Digital Setup.
48
MSO70000/C, DSA70000B/C, and DPO70000B/C Series
MSO5000 and DPO5000 Series
MSO70000/C, DPO/DSA70000B/C, DPO7000, and MSO/DPO5000 Series User Manual