KERN TKFP 3V20M-A Installation Instructions Manual page 10

Variant 1:
Note on transport securing
Type of transport securing
1. Remove the weighing plate.
2. Turn the scale over so that the bottom is facing you.
3. The position of the transport securings is marked by an arrow.
4. Remove the nuts of the transport securings on the lower side.
5. Remove the threaded pin on the lower side.
6. Turn the balance over so that the top is facing you.
10
• 1 x hexagon screw on the upper side
with nut
• 1 x threaded pin with inner hexagon on
the lower side with nut
TKFP-V20-A-IA-e-2324