Preparing For Use; Operation Display - Sanyo DSR-5709P Quick Manual

1

PREPARING FOR USE

Operation display

When the power is turned on, the operation display is shown
at the top of the monitor screen. This area indicates the date,
time, picture quality and other information needed for
operation.
Operation
display area
(1) (2) (3)
01-01-07 00:00:00 REC REPEAT EN A ALARM 0000000
* The above is an example display. This is not the default.
(1) Date display ( P.5)
Be sure to specify the correct date using menu settings.
(2) Time display ( P.5)
Make sure to specify the time using menu settings. Recording
is not possible until the time is set.
(3) Operation symbol display
Displays the current operation, such as recording or playback.
REC: Recording
EXT: External timer recording
: Normal playback
: Reverse playback
: Still
The digital video recorder uses the date and time to
manage recording and playback points. Accordingly, if the
time has not been set correctly, it is not possible to
effectively search for video data.
English
0
01-01-07 00:00:00 REC REPEAT EN A ALARM 0000000
02
(4) (5)(6) (7)
02
(8)
: Fast-forward playback
: Fast-rewind playback
: Slow playback
: Reverse slow playback
[MENU] button
[EXIT/OSD] button
During simultaneous recording and playback, the display
indicates playback (
(4) Remaining memory in recording area
It is displayed while recording.
Displays the remaining area memory as a percentage when
overwriting in the recording area is not permitted. If
overwriting is permitted, "REPEAT" is displayed.
(5) Picture quality display
Displays the quality of the video that can be recorded on the
hard disk. Set to "EN" (Enhanced) by default setting.
[Settings] ( indicates default setting)
BA Basic
NO Normal
EN Enhanced
FI Fine
SF Super Fine
(6) Audio recording display
"A" is displayed when audio is being recorded. "A" is displayed
when audio is being played back if audio is recorded.
(7) Alarm display and alarm count display
When an alarm is set using the "ALARM REC MODE SET"
menu item, the following information is displayed.
When alarm recording is set;
"ALARM" and the alarm number are displayed in stand-by
mode.
"ALARM" flashes during alarm recording.
When pre-alarm recording is in progress;
"PRE" and the alarm number are displayed in stand-by
mode.
When an alarm occurs, "PRE" disappears and "ALARM"
and the alarm number are displayed.
When performing playback from the archive area;
"ARCHIV" and the backup number are displayed.
3
Shuttle dial
Jog dial
).