Device Information; Device Care; Garmin Swim Specifications; Usb Ant Stick Specifications - Garmin Swim Owner's Manual

Hide thumbs Also See for Garmin Swim:
Table of Contents

Advertisement

STROKES: Average number of strokes per length during the
current activity, interval, or last length.
STROKE TYPE: Stroke type during the interval or last length.
SWOLF: Swolf score is the sum of the time for one length plus
the number of strokes for that length
select a data field to display the average swolf score during
the current activity, interval, or last length.
TIME ELAPSED: Total time recorded during the current activity
or interval. For example, for an activity, if you swim 10
minutes, then pause the timer for 5 minutes, then start the
timer again and swim for 20 minutes, your elapsed time is 35
minutes.
Inverting the Display of the Training Pages
The default appearance of the training pages is black on white
while swimming and white on black (inverted) while paused.
1
Select
> SWIMMING > INVERTED SCREEN.
2
Select an option:
• Select PAUSED to invert the screen colors when the
timer is paused.
• Select SWIMMING to invert the screen colors when the
timer is running.

Device Information

Device Care

Avoid pressing the keys under water.
Avoid extreme shock and harsh treatment, because it can
degrade the life of the product.
Thoroughly rinse the device with fresh water after exposure to
chlorinated or salt water environments.
Do not use a sharp object to clean the device.
Avoid chemical cleaners and solvents that can damage plastic
components.
Always wipe the device dry after cleaning.
Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.

Garmin Swim Specifications

Battery type
User-replaceable, coin cell CR2032, 3 volts
(page
4)
Battery life
1 year
NOTE: The actual battery life depends on how
much you use swim mode, sleep mode, and the
backlight.
Water resistance
50 m
NOTE: The watch is designed for surface
swimming.
Operating
From 15ºF to 120ºF (from -10ºC to 50ºC)
temperature range
Radio frequency/
2.4 GHz ANT+™ wireless communications
protocol
protocol

USB ANT Stick Specifications

Power source
USB
Operating temperature
From 14°F to 122°F (from -10°C to 50°C)
range
Radio frequency/protocol
2.4 GHz ANT+ wireless communications
protocol
Transmission range
Approximately 16.4 ft. (5 m)
4
(page
2). You can
NOTICE

Replacing the Battery

Do not use a sharp object to remove user-replaceable batteries.
Contact your local waste disposal department to properly
recycle the batteries. Perchlorate Material – special handling
may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.
Use extreme care when replacing the battery. Do not damage
the battery contacts, battery compartment, or O-ring. Damage
can compromise the water resistance of the device.
1
Wrap the end of a small flat screwdriver
The tape protects the watch exterior, O-ring, and battery
compartment from damage.
2
Carefully pry the battery cover
3
Remove the battery
.
4
Make sure the O-ring
completely seated in the lowest groove.
5
Tip the new battery under the two plastic tabs
into place.
Do not damage the contacts
WARNING
NOTICE
with tape.
off.
is not damaged and that it is
, and press it
.
Device Information

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents