Storage Features - Electrolux EI23CS65KS Use And Care Manual

Shelf features
CAUTION
To avoid injury from breakage, handle
tempered glass shelves carefully.
NOTE
Features may vary according to model.
To change the position of a shelf:
1 Remove all items from shelf, then separate
shelf from hanger by lifting the front of the
glass and pulling directly towards you.
2 Detach clip from the back of hanger by
pushing down on the top of the clip and
pulling the clip towards you.
3 Lift the front of the glass shelf to a 45-degree
angle and slide the glass shelf toward you.
4 Lift the hanger directly upwards and then
towards you to remove it from the ladder.

Storage Features

5 Place top hooks of the hanger into the
desired slot, and lower straight down until
lower hooks rest on the ladder.
6 Reinsert clips by positioning prongs on either
side of the hanger hook and pushing down
on the top of the clip until it fits into the slot.
7 Reinsert the glass shelf by pushing it into the
hanger bracket at a 45-degree angle.
8 Gently set the shelf onto the hanger once the
back is secured by the hanger.
9 You are now ready to set items on the shelf
CAUTION
Shelves must be removed prior to moving the
refrigerator.
19