Electrolux EI23CS65KS Use And Care Manual page 17

IQ-Touch
TM
(some models)
Your refrigerator is equipped with a IQ Touch Panel
user interface display. It is only necessary to touch
the panel. There is no need to press with force.
There are three dispenser modes:
1
Water
2
Ice Cubes
3 Crushed Ice
A red indicator light will be illuminated above the
active mode.
Touch the icon to activate the options below.
Any of the following options that are activated have
a red indicator light above the icon.
fast ice Increases the production of ice
fast freeze Activates a faster rate for freezing food
dispenser light On / Off
control lock Press and hold for three seconds to activate
and deactivate. This restricts undesired
changes to the refrigerators settings and
prevents use of the ice and water dispenser.
vacation mode Conserves energy by increasing the time between
automatic defrost. This feature is automatically
activated during long periods between door open-
ings. Vacation mode is manually activated when
the red indicator is lit.
water filter Touch to display filter condition status.
Press and hold for three seconds to reset.
air filter Touch to display filter status. Press and
hold for three seconds to reset.
temp display Touch to toggle the freezer and refrigerator
temps display on and off.
Touch and hold temp display to toggle
display from Fahrenheit to Celsius.
mute sounds Tones emitted by each keypress can be
turned off based on user preference. The
sounds are muted when the red indicator is
lit. Warning signals will stay active.
factory default Resets all refrigerator settings such as
temp, temp display and ring tones to their
factory default settings.
on off Press and hold for three seconds to turn off
the cooling system to clean the refrigera-
tor. It also turns off all dispenser functions.
The temperature display will read OFF.
IMPORTANT
Pressing the system off icon does not turn off
power to your refrigerator. You must unplug the
power cord from the wall outlet.
Setting cooling temperatures
1 Touch the panel to illuminate the display to
the Plus (+) and minus (-) indicators which
appear on either side of the displayed
temperatures.
2 Press the + or – indicator to adjust the
temperature to the desired setting.
The temperature display will begin to blink
with the first touch. The display times out
after 5 seconds and returns to the basic
display.
Controls
17