Agilent Technologies 8590 Series Service Manual page 52

Making Adjustments
5. Crystal and LC Bandwidth Filter
15.Remove the crystal shorts and press the following analyzer keys.
PEAK SEARCH
MKR FCTN, MK TRACK ON OFF
, 50,
SPAN kHz
MKR FCTN, MK TRACK ON OFF
, 3,
BW kHz
PEAK SEARCH, MARKER DELTA
, 30,
BW kHz
PEAK SEARCH
16.Verify that the MARKER ∆ frequency does not exceed 3 kHz.
If the signal shift is out of tolerance, repeat
17.Press the following analyzer keys.
MKR
MARKER 1 ON OFF
52
(ON)
(OFF)
(OFF)
step 3 to step 16.
Chapter 2