SPECIFICATIONS
Ø60
G1¼
G½
Max. 230
OPTIONAL HANDLE
TX 302 BCBR
"CURIO" Cross Hand le S ingle Hole Bidet Fa uce t
w/1 ¼" Po p-Up Wa ste
TX 302 BCSBR
"CURIO" S imp le Cross Han dle Single Hole
Bide t Faucet w/1 ¼" Po p-Up Wa ste
TX 302 BCLBR
"CURIO" Le ve r Hand le S ingle Hole Bidet Fau ce t
w/1 ¼" Po p-Up Wa ste
OPERATING CONDITIONS
1. Water supply pressure : 0.05 ~ 0.75 MPa
2. Ensure that water supply is clean ( No Sand, Dirt, Etc.).
S06552BR
ATTENTION
1.
Don t use abrasive cleaners or solvents on faucets
and fittings.
2.
As the product model is constantly updated, the
actual product may not look the same as it shown in
the diagram, but the basic installation principles are
the same.
INSTALLATION
1.
110
63
Faucet
Water Supply
2.
Packing
Triangle
Packing
Kick Box
"CURIO" SINGLE HOLE BIDET FAUCET
Lift Rod
Packing
Setting Bolt
Washer
Setting Nut
To Hot
To Cold
Water Supply
Plug
Siphon
Pop-Up
Clip
Nut
Bolt
Bolt
Washer
Pivot Rod
Packing
W/ 1¼" POP-UP WASTE
TROUBLESHOOTING
CHECK
PROBLEM
POINT
Flow rate unsatisfactory
Water leaks around the handle
Handle is loose
Plug cannot open and close
1. AERATOR
MAINTENANCE
All Finishes : Clean the finish with mild soap and warm water.
Wipe entire surface completely dry with clean soft cloth. Many
cleaners may contain chemicals, such as ammonia, chlorine,
toilet cleaner etc. which could adversely affect the finish and
are not recommended for cleaning
TX302BC
SOLUTION
1
Remove and clean
2
Tighten
3
Tighten
4
Tighten
3. BOLT
2. CERAMIC
HEAD WORK
4. BOLT
R3
Need help?
Do you have a question about the CURIO TX302BC and is the answer not in the manual?
Questions and answers