Advertisement
Available languages
Available languages
Quick Links
SPECIFICATIONS
OPERATING CONDITIONS
1. Water supply pressure : 0.05 ~ 0.75MPa.
2. Ensure that water supply is clean
( No Sand, Dirt, Etc.).
MAINTENANCE
All Finishes : Clean the finish with mild soap and
warm water. Wipe entire surface completely dry
with clean soft cloth. Many cleaners may contain
chemicals, such as ammonia, chlorine, toilet
cleaner etc. which could adversely affect the
finish and are not recommended for cleaning
S06873R
SPECIFICATIONS
OPERATING CONDITIONS
1. Water supply pressure : 0.05 ~ 0.75MPa.
2. Ensure that water supply is clean
( No Sand, Dirt, Etc.).
MAINTENANCE
All Finishes : Clean the finish with mild soap and
warm water. Wipe entire surface completely dry
with clean soft cloth. Many cleaners may contain
chemicals, such as ammonia, chlorine, toilet
cleaner etc. which could adversely affect the
finish and are not recommended for cleaning
S06873R
ATTENTION
1. Don t use abrasive cleaners or solvents on
faucets and fittings.
2.
As the product model is constantly updated,
the actual product may not look the same
as it shown in the diagram, but the basic
installation principles are the same.
45
INSTALLATION
G ½
Use Seal Tape
(Not Include)
80
ATTENTION
1. Don t use abrasive cleaners or solvents on
faucets and fittings.
2.
As the product model is constantly updated,
the actual product may not look the same
as it shown in the diagram, but the basic
installation principles are the same.
45
INSTALLATION
G ½
Use Seal Tape
(Not Include)
80
METAL HANDLE SINK TAP
W/ HOSE COUPLING
Water Supply
Body
METAL HANDLE SINK TAP
W/ HOSE COUPLING
Water Supply
Body
T26-13
TROUBLESHOOTING
CHECK
PROBLEM
POINT
Wat er leaks around t he body
1
1. CAP NUT
T26-13
TROUBLESHOOTING
CHECK
PROBLEM
POINT
Wat er leaks around t he body
1
1. CAP NUT
SOLUTION
Tight en
R2
SOLUTION
Tight en
R2
Advertisement
Related Manuals for Toto T26-13
Summary of Contents for Toto T26-13
- Page 1 METAL HANDLE SINK TAP T26-13 W/ HOSE COUPLING SPECIFICATIONS ATTENTION TROUBLESHOOTING 1. Don t use abrasive cleaners or solvents on CHECK PROBLEM SOLUTION faucets and fittings. POINT Wat er leaks around t he body Tight en As the product model is constantly updated,...
- Page 2 METAL HANDLE SINK TAP T26-13 W/ HOSE COUPLING SPESIFIKASI PERHATIAN PENYELESAIAN MASALAH 1. Jangan gunakan pembersih atau pelarut POIN MASALAH SOLUSI abrasif pada faucet dan fitting. PERIKSA Karena model produk terus mengalami Air bocor disekita r bo di Ken can gkan...
Need help?
Do you have a question about the T26-13 and is the answer not in the manual?
Questions and answers