Page 1
Instruction Manual WASHLET T1SW2491 Thank you for your recent purchase of this product. Please read the enclosed information to ensure the safe use of your product. Be sure to read this Instruction Manual before using your product and keep it in a...
Table of Contents Temperature Adjustment ......18 Introduction Warm water / Toilet seet / Drying ....18 Changing Settings ........20 Safety Precautions ........4 Setting List ............20 Operational Precautions ......9 The energy saver features ......22 Parts Names ..........12 How to Set .............24 Auto energy saver........24 Preparation ..........14 Timer energy saver ........24 Using the Product for the First Time....14...
Page 3
Reference Maintenance What to Do? ..........34 Maintenance ..........28 Before maintenance ........28 If the water does not flow due to a water Power Plug ............28 service interruption ........34 Main Unit ............29 If you cannot operate with Gap between the Main Unit and Bowl Unit ..30 the remote control .........34 Replacing the batteries ......34 Gap between the Main Unit and the Toilet Lid ...31...
Introduction Safety Precautions IMPORTANT SAFEGUARDS READ ALL INSTRUCTIONS BEFORE USING Symbols and Meanings WARNING May result in death or serious injury. CAUTION May result in injury or property damage. WARNING Never disassemble, repair or alter. Refrain from sitting on the seat for long periods. Doing so may cause fire, electrical shock, overheat- It may cause low-temperature burns.
Page 5
Introduction WARNING When leaking battery fluid adheres to your body or More importantly, if you are an individual suffering clothes, wash it away with clean water. from any immune deficiency as a result of disease, chemotherapy, or other medical condition compro- The fluid may damage your eyes or skin.
Page 6
Introduction Safety Precautions WARNING CAUTION Confirm that a properly grounded outlet has been Do not use the product if the main unit is unstable. installed. Doing so may cause the main unit to come loose and Failure to install a grounded outlet could cause elec- fall, resulting in injury.
Page 7
Introduction CAUTION To prevent a sudden water leak, do not remove the When installing the drain plug with water supply drain plug with water supply filter when the shutoff filter, make sure that it is securely tightened in its valve is open. proper position.
Introduction Safety Precautions DANGER Do not place in or drop into water or other To reduce the risk of electrocution: liquid. Do not use while bathing. Do not reach for the product when it has fallen Do not place or store the product where it can into water.
Introduction Operational Precautions For prevention of malfunctions For prevention of damage Do not block the remote control transmitter or receiver. Wipe plastic areas such as the main unit and May cause main unit to malfunction. remote control with a soft cloth tightly wrung out with water.
Page 10
Introduction Operational Precautions For prevention of malfunctions and Do not apply force to the remote control. This cause malfunction. failures X To prevent the remote control from being dropped, Turn the power OFF if there is a risk for lightning set it in the hanger when you are not using it.
Introduction Parts Names Toilet lid cushions Model No., etc Toilet lid Seat switch (Built-in) Wand cover Warm air outlet cover Water supply hose Wand Heated seat Power plug Shutoff valve ( Page 14) Power cord A: Main display Power LED Seat LED Energy saver LED Water LED...
Page 13
Introduction Remote control receiver Toilet seat cushions B: Left side of the main unit C: Right side of the main unit Water filter drain valve ( Page 33) Deodorizer outlet Main unit removal button ( Page 30) Deodorizing filter ( Page 32) Cover Water drain plug ( ...
Introduction Preparation Using the Product for Turn on the power the First Time Insert the power plug. X The wand extends and then retracts. Insert the battery Check the "Power" LED illuminates. Remove the remote control from the hanger. Remote control Power Hanger If the light is off...
Operation Basic Operations Mechanism of Operation under the default settings is described in "Mechanism of Auto Functions". Auto Functions These mechanisms be changed. ( Pages 20–27 "Changing Settings") 1. A s you approach 2. A s you sit Pre-mist Deodorizer Pre-mist...
Operation Basic Operations Using the Remote Control Operate the controls on the remote control; a beep sounds when the main unit receives the signal. Pulsating washing Stop Stops the B or C operation. Washes with the water pressure pulsating between soft and Rear washing strong.
Operation Remote control back side How to remove the remote control ( Page 14) Operate the controls on the remote control; a beep sounds when the main unit receives the signal. This section is an overview of the settings that can be configured with the remote control. See the corresponding pages for the detailed descriptions.
Operation Temperature Adjustment Warm Water, Press the button selected in step repeatedly until a desired temperature level illuminates. Toilet Seat, Drying X The setting changes each time the button is pressed once Three different temperature levels from high to low and "OFF"...
Page 19
Operation To turn the warm water Press the button selected in step repeatedly temperature and toilet seat until the temperature level is set to "OFF". temperature "OFF" X The setting changes each time the button is pressed once Remove the remote control from the hanger. ( ...
Operation Changing Settings Setting List Available Settings Setting Types Bold: Initial settings Auto energy saver ( Page 24) ON/OFF Timer energy saver ( Page 24) 6H/9H/OFF ON/OFF Pre-mist ( Page 25) ON/OFF Deodorizer ( Page 25) ON/OFF Beep sound ( ...
Page 21
Operation X Setting buttons ( Pages 24–27) Setting with buttons on the front of the remote control. Press the button indicated in step 1 for approxi- mately 10 seconds or longer to enter setting mode. ( Pages 25-27) Flash Check A Stop button...
Operation Changing Settings The energy saver features "Auto energy saver" and "Timer energy saver" can be selected. Energy saver is on To save energy, lower (or turn "OFF") the seat or warm water temperature. Lit (Green) Note: Even if the energy saver is being activated (with the toilet seat heater set to "Low"...
Page 23
Operation Timer energy saver and Auto energy saver You want to save the maximum amount of energy possible? When both "Timer energy saver" and "Auto energy saver" are set, "Auto energy saver" operates when "Timer energy saver" is not operating. When energy saver is in operation Main display During "Auto energy saver":...
Operation Changing Settings How to Set Timer energy saver Set the "Timer energy saver" at the time you want to start it. Auto energy saver Example: To save energy from 1 am to 7 am (for 6 hours) Press "Auto energy saver" button. When the time of the day reaches 1:00 am at X The setting changes each time the button is night, press "Timer energy saver"...
Operation Pre-mist Deodorizer Set whether or not to spray mist in the bowl Set whether or not to deodorize automatically unit automatically after sitting on the toilet seat Press "Stop" button until all Press "Stop" button until all Check Check LEDs on the remote control are LEDs on the remote control are lit or flashing.
Operation Changing Settings Beep sound Pressure / position setting Set whether or not to make a beep sound Set whether or not to keep your favorite pressure and position settings Press and hold both the "Stop" Check button and "Water pressure Press and hold both the "Stop"...
Operation Personal setting Registering Personal Settings Set whether or not to use the personal setting Register your preferred wand position, etc. Press and hold both the "Stop" Check Press "Personal setting" button. button and "Water pressure Select the location to be set adjustment +"...
Maintenance Maintenance Before maintenance Power Plug WARNING y Dry cloth Always turn off the power before maintenance or inspection. Failure to do so may cause electric shock or mal- y Wet cloth function, resulting in a breakdown. For safety, turn the power OFF Approximately once a month before maintenance.
Maintenance Main Unit Attention This product is an electric appliance. Be careful not to let water seep inside or leave detergent in the gap y Soft cloth soaked in water between the main unit and bowl unit. Do not put any cleaning solution directly onto the warm air outlet or cover around the wand, etc.
Maintenance Maintenance Gap between the Main Unit Clean the top of the bowl unit and the bottom of and Bowl Unit the main unit. Wipe with a soft cloth soaked in a diluted, pH You can remove the main unit to clean the top of neutral kitchen detergent.
Maintenance Gap between the Main Unit Wipe with a soft cloth that has been soaked in and the Toilet Lid water and wrung-out thoroughly. The toilet lid can be removed for thorough cleaning. Reinstall the toilet lid. y Soft cloth soaked in water D Align the right side pin and hinge parts.
Maintenance Maintenance Wand Deodorizing Filter Approximately once a month y Soft cloth Turn the power "OFF". ( Page 28 ) y Toilet paper Remove the deodorizing filter. y Dry cloth y Nylon scrubbing brush Hold the tab and pull outward. May cause damage.
Maintenance Drain plug with water supply Clean the filter with a tool such as a toothbrush. filter X Also, remove any dust from inside the hole of the drain plug with water supply filter. Approximately once every 6 months If you think the water pressure has weakened Reinstall the drain plug with water supply filter and cover.
Reference What to Do? If the water does not If you cannot operate flow due to a water with the remote control service interruption If the low battery warning mark " " on the surface of the remote control is flashing, please replace the batteries.
Reference Freeze Damage Drain the pipe. Prevention Remove the cover and drain plug with water supply filter. Loosen the drain plug with water supply filter with a When the ambient temperature is likely to drop to flat-head screwdriver and then pull it. 32 °F (0 °C) or lower, take measures to prevent freezing.
Reference What to Do? Long Periods of Disuse Turn the power "OFF". ( Page 28) If the toilet is in a location you will not visit for a Drain the pipe. long time, drain the water. Remove the cover and drain plug with water sup- ply filter.
Reference Resupplying the Water Loosen the water drain plug until water comes out from around the wand. Open the shutoff valve. ( Page 14) X Check that water is not leaking from a pipe or Water comes out from around the wand. the main unit.
B: Is the Energy saver LED lit? If the problem persists, consult the installer, seller or TOTO customer service ( see contact information X While the LED is lit, energy saver ( Pages 22, 23) is on the back cover).
Reference Rear Washing, Front Washing and Wand Trouble Please check The wand (or washing water) does Has the toilet been sat "ON" and used continuously for 2 hours or longer? (If so, operation is stopped for safety purposes.) not come out X Stand up from the seat and then use again.
Reference Troubleshooting Warm air drying Trouble Please check The dryer temperature is low Is the dryer temperature set to low level? ( Page 18) Stops in the middle of use The feature stops automatically after about 10 minutes of continuous use. Does the seat switch have difficulty detecting? X Sit back on the toilet seat.
If the nut of the connecting pipe is loosened, retighten it by hand. Do not use any tool. ing connections X If the water leak does not stop, close the shutoff valve and consult with TOTO customer service. ( see contact information on the back cover) The main unit is unstable There is clearance between the toilet seat cushion and the bowl unit for activating the seat switch.
When disposing of this product, please follow your local or state guidelines for proper disposal. *1 Maximum power consumption for warm water or heated toilet seat. *2 At 29 PSI (0.20 MPa) water pressure *3 Temperature around the warm air outlet measured by TOTO.
8. To obtain warranty repair service under this warranty, TOTO reserves the right to make such inspections as may be you must take the Product or deliver it prepaid to a TOTO necessary in order to determine the cause of the defect.
Page 44
You are advised to record the following information to allow quick service. Date of purchase : Name of shop : Date : year month day Tel : ( This code is for manufacturer management use. 2024.7.10 D07K51...
Need help?
Do you have a question about the T1SW2491 and is the answer not in the manual?
Questions and answers