Advertisement
STOPPING A PROGRAM
To cancel a program which is running:
•
•
In case that the door is opened during the operation, to the next door
closing it is going to be necessary to start the program as shown in
paragraph "
point in which it was interrupted.
In case that the tub temperature is higher than 50°C the program
will start about 60 seconds later.
10
User instructions
Interrupt the program (see "
Press the START/PAUSE button
display will show "P0" and the dishwasher will immediately
switch to the end of the cycle and drain the tank (during this
process, the "START/PAUSE symbol will flash). When the
drain procedure ends, the end of cycle "End" message
appears on the display.
S
TARTING THE PROGRAM
INTERRUPTING A PROGRAM
and hold it down; the
". The program will resume from the
")
Advertisement
