Download Print this page
Smeg LSPU8653X Manual
Hide thumbs Also See for LSPU8653X:

Advertisement

Quick Links

Contents
1.
IMPORTANT SAFETY INSTRUCTIONS ____________________ 2
2.
INSTALLATION ______________________________________ 10
3.
PRODUCT DESCRIPTION _____________________________ 16
4.
OPERATING INSTRUCTIONS ___________________________ 21
5.
CLEANING AND MAINTENANCE ________________________ 22
6.
TROUBLESHOOTING _________________________________ 23
Thank you for choosing one of our products.
You are advised to read this manual carefully; it contains all the
information you need about the right conditions for the proper, safe use
of your dishwasher.
This manual contains only the basic information required to use the
appliance. The complete manual can be obtained from
www.smeg.com/download-manuals
by entering the product code shown on the plate attached to the inner
right hand edge of the dishwasher door.
The manual can be accessed quickly via the QR code using a device
with a QR reader application.
1

Advertisement

loading

Summary of Contents for Smeg LSPU8653X

  • Page 1: Table Of Contents

    This manual contains only the basic information required to use the appliance. The complete manual can be obtained from www.smeg.com/download-manuals by entering the product code shown on the plate attached to the inner right hand edge of the dishwasher door.
  • Page 2: Important Safety Instructions

    Installation TRANSLATION ORIGINAL INSTRUCTIONS 1. IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS  Before using the appliance, carefully read all the instructions contained in this manual.  During installation, take care not to injure yourself on the sharp edges of the appliance: wear safety gloves.
  • Page 3 Installation  Do not use appliances which have been damaged during transit! If in doubt, contact your dealer.  Do not operate your dishwasher unless all enclosure panels are properly in place.  Do not tamper with controls.  The appliance must be installed and connected in accordance with the instructions provided by the manufacturer.
  • Page 4 Installation flammable, do not smoke or use an open flame during this time.  Never leave waste packaging unattended. Do not allow children to play with packaging materials. Separate waste packaging materials by type and consign them to the nearest recycling centre. ...
  • Page 5 Installation  Building-in the appliance underneath a hob is absolutely forbidden. Installing a hob on top of free- standing appliance is absolutely forbidden.  To ensure stability, install the appliance only under continuous worktop, securely fixed to adjacent cabinets. If the appliance is installed in a high cabinet, both the appliance and the cabinet must be adequately fixed.
  • Page 6 Installation  The appliance must be connected to the water supply by means of new hoses.  Briefly test the appliance after installation. Run a wash cycle with a temperature of between 113°F and 158°F (45°C-70°C) with the dishwasher empty and using a specific dishwasher detergent.
  • Page 7 Installation  Some detergents are strongly alkaline. Avoid contact with the skin and eyes. Detergents can be extremely dangerous if swallowed. They contain substances capable of causing permanent damage to the mouth and throat, and even leading to suffocation. Observe all the safety instructions on the packaging of these products.
  • Page 8 Installation void the warranty but may also put the user’s safety at risk.  In the event of a fault, disconnect the dishwasher from the electrical power supply and shut off the water tap. In the event of damage to the supply cord, have it replaced by the manufacturer or an authorised technical service centre.
  • Page 9 Warnings 1.1 Disposal The appliance does not contain substances in quantities sufficient to be considered hazardous to health and the environment, in accordance with current European directives: To dispose of the appliance:  Remove the washing compartment door.  Cut the power cable, ...
  • Page 10: Installation

    Installation 2. INSTALLATION 2.1 Technical characteristics Water supply pressure min. 0,05 - max. 0,9 MPa (min. 0.5 – max. 9 bar) Water supply temperature max. 60°C-140°F Capacity 12-13 standard place settings Class of protection against IPX0 moisture Protection against electric class I shock Electrical data...
  • Page 11 Installation 2.2 General Information  This appliance6 may be placed up against walls or other furniture units.  If the appliance is installed near a heat source, fit a special insulating panel to prevent overheating and malfunction of the appliance. ...
  • Page 12 Installation Building-in a dishwasher underneath a hob is absolutely forbidden. Moreover, dishwashers may not be installed directly touching appliances which are not conventional built-in kitchen appliances (e.g. fireplaces, stoves, etc.). When installing the dishwasher in a compartment next to one or more other appliances, it is essential to comply with all the recommendations provided appliance’s manufacturer...
  • Page 13 Installation Water supply connection CONNECTING TO THE WATER SUPPLY Connect the intake hose to a cold water supply with ¾” gas thread, inserting the filter A supplied with the dishwasher. Take care to screw the hose firmly into place with your hands and then complete by tightening about ¼...
  • Page 14 Installation DRAIN CONNECTION Insert the dishwasher’s drain hose into a drain pipe having a diameter of at least 4 cm (1"37/64), or alternatively, place it inside the kitchen sink using the plastic support provided, taking care not to crush or excessively bend the hose.
  • Page 15 Installation 2.4 Electrical connection Check that the voltage and the frequency of the mains match the ratings on the name plate of the appliance positioned on the inner edge of the door.  The plug on the supply cord and the corresponding socket outlet must be of the same type and meet the regulations in force.
  • Page 16: Product Description

    User instructions 3. PRODUCT DESCRIPTION 3.1 Control panel All the dishwasher controls are grouped on the upper panel. Switching on, programming, switching off etc. are only possible when the door is open. ON/OFF BUTTON OPTION BUTTONS/LIGHTS SELECTED PROGRAM BUTTONS/LIGHTS START/PAUSE BUTTON TOP DISPLAY (3 FIGURES) SALT WARNING LIGHT RINSE AID WARNING LIGHT...
  • Page 17 User instructions SWITCHING ON With the door open, press the ON/OFF button on the top panel to switch on the dishwasher. The LED on the button and the DISPLAY light up. PROGRAMMING All programming operations are only possible with the door open and the dishwasher switched on.
  • Page 18 User instructions PROGRAMS TABLE Program 3.8l SOAK cold 0,02 1gal. 175- 10,6l 45°C 55°C(4) /65°C 0,5- AUTO (2) cold ● (**) (113°F) (131°F/149°F) 2,8 gal 16.6l 50°C 55°C (4)/70°C 152(4) DELICATE cold 2 cold ● 1,15 (**) (122°F) (131°F/158°F) 4,38 gal 13,4l 65°C 55°C (4)/70°C...
  • Page 19 User instructions Switching on With the door open, press the ON/OFF button on the top panel to switch on the dishwasher. The LED on the button and the DISPLAY light up. IMPORTANT The door of the dishwasher must ble closed within 4 seconds after use of the program selection button for all functions (e.g.
  • Page 20 User instructions Description of the programs: SOAK Pans and dishes awaiting completion of the load AUTO Normally soiled dishes including dried-on residues, for daily use. DELICATE Wash cycle for mixed loads such as wine glasses and lightly soiled dishes. Mixed dishes very dirty, including dried-on residues. POTS &...
  • Page 21: Operating Instructions

    User instructions 4. OPERATING INSTRUCTIONS After having installed the dishwasher, remove the basket retainers. 4.1 Adding the salt The salt prevents the formation of scale deposits.  Unscrew the cap of the salt container.  Only for the first time, fill the container with a litre of water.
  • Page 22: Cleaning And Maintenance

    User instructions 5. CLEANING AND MAINTENANCE Before carrying out any work, always unplug the appliance from the electrical supply or switch off the omnipolar circuit breaker. CLEANING THE WATER INTAKE FILTER Close the water supply tap, unscrew the end of the water intake hose, remove the filter A and clean it under running water.
  • Page 23: Troubleshooting

    User instructions 6. TROUBLESHOOTING The dishwasher has an autodiagnosis system capable of detecting and indicating a preset series of possible malfunctions. TABLE OF MALFUNCTIONS DETECTED BY THE AUTODIAGNOSIS SYSTEM FAULT DESCRIPTION Error 01 Anti-flooding system tripped (where installed). Error 02 The system that limits the water level in the dishwasher has been tripped.