9131D Configuration and Connection Guide
To install, connect the video inputs to the 9131DT, connect the video monitors or other video receptors to
the 9131DR, and connect an appropriate optical fiber between the 9131DT and 9131DR optical ports.
Connect data signal sources or destinations, as required, to the "DATA" and "RS485" ports per the
following Built-In Data Connection section.
F
3
IGURE
4 Video Inputs
Simplex RS485 2-Wire
Simplex RS232
Simplex RS422, RS232 or
RS485 2-Wire or 4-wire
Video Camera
Video Camera
Fiber
Connection
Simplex RS232
Simplex RS422, RS232 or
RS485 2-Wire or 4-Wire
Simplex RS485 2-Wire
4
Video
Monitor
4 Video Outputs
Video
Monitor