Pre-Run Machine Inspection; Starting Machine; Emergency Stop Procedures - Windsor CV86LI Operating Instructions Manual

Machine Operation

Pre-Run Machine Inspection

Do a pre-run inspection to find possible problems that
could cause poor performance or lost time from break-
down. Follow the same procedure each time to avoid
missing steps.
NOTE: Perform Pre-run Machine Check before
operating machine. See Service Schedule in
Maintenance Section.

Starting Machine

FOR SAFETY: Before starting machine, make sure
that all safety devices are in place and operating
properly.
1. The operator should be on the pedal platform. The
throttle pedal must be in the neutral position.
2. Turn the machine power on by turning key switch
clockwise to the "ON" position.
3. Press the Drive Reset Directional Control Switch to
set the intended direction for travel.
4. Press lightly on the throttle pedal with right foot.
8.641-374.0 operator's manual - chariot 3 - cv86/1 rs bp

Emergency Stop Procedures

1. Push in emergency stop button. This will engage
the brake and cause the machine to stop immedi-
ately.
Operations
19