Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for BRIO CL500CV
Summary of Contents for BRIO CL500CV
- Page 1 Top-Load Water Dispenser Setup Manual Model No.: CL500CV...
-
Page 2: Table Of Contents
Table of Contents Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Intended Use . -
Page 3: Safety Information
Safety Information WARNING: To reduce risk of injury and property damage, you must read this entire guide before assembling, installing and operating the dispenser. WARNING: This product dispenses water at very high temperatures. Failure to use properly can cause personal injury. -
Page 4: Intended Use
Intended Use This dispenser is intended to be used in household and similar applications such as: • Staff kitchen areas in shops, offices and other working environments • Farm houses • Clients in hotels, motels and other residential type environments Bed and breakfast type environments •... -
Page 5: Product Dimensions
Product Dimensions Height Width Depth 102.6 cm (40.4 in.) 32.6 cm (12.8 in.) 36.7 cm (14.4 in.) Operational Specifications CAUTION: This unit dispenses water at temperatures that can cause severe burns. Avoid direct contact with hot water. Keep children and pets away from unit while dispensing. Never allow children to dispense hot water without proper and direct supervision. -
Page 6: Install A Water Bottle
3 . Install a Water Bottle IMPORTANT: To prevent dry heating, do not turn on the dispenser until you complete the steps in this procedure. NOTE: This dispenser is compatible with 3 and 5-gallon water bottles. It is recommended that you purchase water bottles equipped with a 55-millimeter push cap. -
Page 7: Operation
Operation IMPORTANT: This unit has been tested and sanitized prior to packing and shipping. During transit, dust and odors can accumulate in the tank and lines. Dispense and dispose at least one quart of water prior to drinking any water. Turn the Dispenser On/Off IMPORTANT: Before you turn the dispenser on and activate the hot and cold switches, ensure a bottle is... -
Page 8: Troubleshooting
Troubleshooting Problem Solution • It takes up to one hour after setup to dispense cold water. • Make sure the power cord is properly connected to a working outlet. The cold water is not • Make sure the back of the dispenser is at least 20 cm from a wall and there is free airflow on all 20 cm sides of the dispenser. -
Page 9: Cleaning And Maintenance
Cleaning and Maintenance Cleaning For best taste, performance, and hygiene, clean the cold tank at least every 3 months and your cabinet and spout each time you change your water bottle. Empty and clean the drip tray as needed. To minimize mineral deposits, use only high-quality purified bottled water. -
Page 10: Warranty
Warranty Brio (“Vendor”) warrants to the original purchaser of the Brio Water Coolers (the “Product”), and to no other person, that if the Product is assembled and operated in accordance with the printed instructions accompanying it, then for a period of one (1) year from the date of purchase, all parts in the Product shall be free from defects in material and workmanship. - Page 12 Contact Us Call: +1 844-257-4103 ©2020 DTWUSA...