Connect To Devices Through Av; Connect To A Computer Through Vga - Philips NPX641/INT User Manual

Connect to devices through
AV
You can connect a playback device (e.g. a DVD
player, gaming console, camcorder or digital
camera) to the projector through AV connection.
With this connection, images are shown on the
projection screen, and audio is played on the
projector.
1 Using an RCA cable with 3.5 mm plug (not
included in the box), connect the AV jack
(3.5 mm) on the projector to the analogue
audio output jacks (red and white) and/or
composite video output jack on a playback
device.
AV MICRO SD
2 Press on the remote control to display
the input source list, and then select AV.
Connect to a computer
through VGA
You can connect a computer (e.g. a desktop
or laptop) to the projector through VGA
connection. With this connection, images are
shown on the projection screen.
Notice
Many laptops do not activate the
external video output automatically
when you connect a second display such
as a projector. Check your laptop user
manual to find out how to activate the
external video output.
1 Using a VGA cable (not included in the box),
connect the VGA port on the projector to
the VGA output port on a computer.
10
HDMI 1 HDMI 2 USB DC
VGA
2 Adjust your computer's screen resolution
to the correct setting and switch the VGA
signal to an external monitor. The following
resolutions are supported:
Resolution
VGA 640 x 480
SVGA 800 x 600
XGA 1024 x 768
WXGA 1280 x 768
HD 1280 x 720
FULL HD 1920 x 1080
3 Press on the remote control to display
the input source list, and then select VGA.
Image refresh
rate
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
Philips · NeoPix Ultra One