Problem
The projector cannot read the USB storage
device.
The projector does not react to remote
control commands.
The temperature of the projector's surface
is warm.
The projector does not work after I connect
it to a laptop.
Troubleshooting
Solution
• The projector does not support the exFAT file
system.
• Format the USB storage device in FAT32 or NTFS
format, then use it.
• Check the batteries of the remote control.
• For this projector it is normal to generate
moderate heat during operation.
• Check that the HDMI cable is plugged in correctly.
• Make sure that the laptop has been switched to
projector display.
17