TechniSat DIGIT ISIO S3 Quick Start Manual page 91

Loading SFI (EPG) data
The DIGIT ISIO S3 has an electronic programme guide (EPG) called SFI (SiehFern
Info). You must first get the device to download the EPG data from the satellite (or if
already configured, via an internet connection) to enable electronic programme guide
data to be displayed.
To do this, your TV automatically starts downloading the EPG data as soon as
the station search has been completed. This process can take up to 30 minutes
(depending on the source of the data).
> If you do not want to wait for the EPG data to be downloaded, you can skip
this process by pressing the INFO button.
If the EPG update has been skipped, your television will load the EPG data
automatically at the time set under Menu > Settings > Programme guide >
Update time, as long as the function is enabled and the television is also in
standby mode at the time.
> You can also start the update manually at any time.
Product registration
By registering your product you can take advantage of further benefits, such as an
extended warranty, and also help us tailor our products and our service to better suit
your needs.
Please note that an Internet connection is required for this.
> Press the OK button to start product registration or INFO to skip this step.
Product registration can also be started at a later time under Menu > Settings
> Special functions.
DE
EN
91