TechniSat DIGIT ISIO S3 Quick Start Manual page 76

> By highlighting Accept using the right/left arrow keys and confirming with
the OK button or by pressing the green function key Accept, the changes are
saved and you move back up to the next menu level.
Alternatively:
> Press the Back key. You are now asked whether the changes made should be
accepted.
> Use the right/left arrow keys to highlight Yes or No and confirm using the
OK button. According to your selection the changes are now saved or rejected
and you return to the next menu level up.
Alternatively:
> To exit the menu directly, press the Menu or TV/RADIO button. In this case
settings that need to be saved manually will be reset.
If the green function button with Accept is not displayed on the bottom line of
the screen, the changes are saved automatically on exiting the menu.
By pressing the TV/RADIO button, you always return to normal TV mode
without saving if you are in a menu.
9.4 Changing a setting
You can create settings using the arrow selection method, the selection list, by
entering numbers and by using the virtual keyboard. The device specifies the
method that can be used to change a highlighted setting. This is evident from the
following displayed symbols:
-
-
-
-
76
Arrow selection method (Item 9.4.1)
Arrows are shown on the left or right edge of the highlight.
Selection list (Item 9.4.2)
The symbol is shown on the right edge of the highlight.
Entering numbers (Item 9.4.3)
Virtual keyboard (Item 9.4.4)
The symbol is shown on the right edge of the highlight.