TechniSat DIGIT ISIO S3 Quick Start Manual page 89

Channel search/ISIPRO
You have various options for searching for new channels or updating the channel list.
You can either use the ISIPRO channel list function to download a new pre-programmed
channel list for your device from the satellite or run a channel scan.
> To download the current channel list, use the up/down arrow keys to
highlight the ISIPRO channel list update line and start the process by
pressing the OK button.
After the channel list update, an automatic channel search on all other
configured reception sources is then carried out via "All Channels".
> If you want to run a channel search via satellite as well, or if the DVB-S
reception signal has not been configured, use the up/down arrow keys to
highlight the All channels or All unencrypted channels field, then start the
channel search process by pressing the OK button.
When using All channels, free-to-air and encrypted channels are searched for;
when using All unencrypted channels, only free-to-air channels are searched
for.
DE
EN
89