TechniSat DIGIT ISIO S3 Quick Start Manual page 83

Smart TV device functions
> In order to use the Internet-based functions on your device there must be an
active connection to the Internet. Select on to allow connection to the Internet.
In order to be able to fully use the internet-based TechniSat additional services
on your device, you must also activate the individual functions.
> You can use the right/left arrow keys to switch the functions on or off.
If you do not wish to use Internet or ISIO functionality, select Internet
connection > no. If you want to use Internet services, the device will
recommend allowing connection to the Internet.
You can call up and change the connection to the Internet and the individual
Internet-based services from TechniSat as well as the Data Protection
Declaration at any time later via the main menu > yellow function key.
The functions described in this quick start manual and the instruction manual
assume that the Internet connection is enabled as well as all activated Internet
functions.
You can display the Data Protection Declaration by pressing the INFO button.
Not all the services which are listed in the Data Protection Declaration are
necessarily supported by the device.
> Press the OK button to apply the setting and go to the next step.
DE
EN
83