Specifications - Sharp HT-SL50 Operation Manual

Specifications

As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification
changes for product improvement without prior notice. The
performance specification figures indicated are nominal
values of production unit. There maybe some deviations
from these values in individual unit.
■
General
Power source AC 220 - 240 V ~ 50/60 Hz
Power Power On: 25 W
consumption
Power Stand-by: Below 1 W
Output power RMS: Total 100 watts
RMS:
Front Left/Right:
RMS: 50W (25W + 25W) (10% T.H.D.)
RMS: 48W (24W + 24W) (1% T.H.D.)
Subwoofer:
RMS: 50W (10% T.H.D.)
RMS: 50W (1% T.H.D.)
Output HDMI™ (ver 1.4 with ARC) output:
terminal (audio/video support to 1080p) x 1
Input Analogue input (Audio in):
terminal Stereo mini socket Ø 3.5 mm
HDMI input: (audio/ video support to
1080p) x 1
■
Soundbar speaker
Type Full Range speaker system
2.2 x 11.5 cm (7/8" x 4-1/2")
Full Range
Maximum 50 W/CH
input power
Rated input 25 W/CH
power
Impedance 4 ohms/CH (3 pieces parallel)
Dimensions Width: 801 mm (31-1/2")
Height: 26 mm (1-1/16")
Depth: 50 mm (2")
Weight 0.66 kg (1.46 lbs.)
■
Subwoofer
Type Subwoofer system
16 cm (6 - 5/16") woofer
Maximum 100 W
input power
Rated input 50 W
power
Impedance 8 ohms
Dimensions Width: 115 mm (4 - 1/2")
Height: 422 mm (16 - 5/8")
Depth: 307 mm (12 - 1/16")
Weight 4.50 kg (9.92 lbs.)
E-12