General Control - Sharp HT-SL50 Operation Manual

General Control

Make sure to enable the HDMI CEC when making
HDMI connection. For details, refer to the operation
manual of the TV.
■
To turn the power on
Plug the AC power lead into a wall socket, the stand-by
indicator turns RED.
This unit will automatically power on if:
1. TV or similar component which supports HDMI CEC, is
turned on.
2. Audio signal is detected from Audio input.
The stand-by indicator will turn BLUE if TV signal is
detected.
Notes:
●
HDMI input will override the Audio input signal.
●
Audio input will function only when there is no signal
from HDMI input.
■
Audio Return Channel (ARC) (Audio
Return Channel submenu)
The Audio Return Channel (ARC) enables an HDMI ARC-
capable TV to send the audio stream to the HDMI OUT
socket of the receiver. To use this function, your TV must
support the ARC. Make sure the LCD TV Audio output
setting is set to PCM, not other formats such as Dolby
Digital, DTS, etc. For details, refer to the operation manual
of the TV.
■
Volume
Volume can only be controlled from your TV.
■
Power Off
This unit will automatically go to stand-by mode (indicator
turns RED) if:
1. TV or similar component which supports HDMI CEC, is
turned off.
2. No signal from Audio input is detected after 20 minutes.
E-10