Advertisement
Repair main points and notes
Adjust the tightness degree of belt
1. Cut off the power
2. Open the machine rear cover
3. Loose the screws fixed on the wash motor
4. Move the motor to the correct position
5. Re-install according to the opposite course
Replace the belt
1. Cut off the power
2. Open the machine rear cover
3. Take out the old belt
4. Install the new belt
5. Adjust the tightness degree of the belt
Replace the power cord
1. Cut off the power
2. Open the machine rear cover
3. Open the connecting box
4. Unclamp the wire to connect
5. Rotate the power cord clip 90 degree
6. Fetches and leave the power cord from the machine case (or the machine base)
7. Replace the power cord to new one
8. Re-install the power cord in opposite course
Replace the wash/spin timer
1. Cut off the power
2. Open the machine rear cover
3. Open the control panel
4. Unclamp the wire to connect
5. Pull out the timer knob
6. Screw off the screws between the panel(and the back cover of the panel) and the tub
7. Screw off the timer screws, take out the timer
8. Install new timer
9. Re-install the timer screws,take out the timer
Replace the wash program
1. Cut off the power
2. Pull out the knob on the wash program
3. Screw off the screws between the control panel(and panel back cover) and the tub
4. Unclamp the plug-in package
5. Screw off the screws fixed on the wash program,then take out the wash program
6. Install new wash program
7. Re-install the wash program in opposite course
Advertisement
