Table of Contents
Advertisement
Operation
Settings
There are a number of settings that can be altered or
adjusted within your stove. (Weekly schedules, Time/date,
temperature units, etc...)
Press and hold the Enter button
to the "Set Data" screen.
Use the Scroll Up (▲) and Scroll Down (▼) buttons to
navigate through the list, and then press the Enter
button to select.
Press the Exit button
your current menu or selection. Pressing the Exit
button while at the Set Data menu screen will bring you
back to the Home Screen. (After a few minutes of
inactivity, the panel will time out and go back to the
Home screen)
Here is a brief description of each of the menu items.
A full description of each menu is available later in this
section. (pg. 24 - 26)
1: General
- This menu allows you to set up your Time/Day, Temperature unit readout (C or F), Language, and
Wifi settings.
2: Set Weekly -
This menu allows you to set a weekly program schedule to be used when the stove is set to the
Weekly Operation mode. This schedule can have up to four on/off cycles per day.
3: Set Combustion -
This menu allows technicians to alter the stove's Exhaust voltages and Blower voltages for
each Heating or Ignition level. (Feed rates are factory set and should not be altered)
4: Set Ash Cleaning Cycle -
Heating level.
5: Set ECO -
This menu lets you to toggle on or off the ECO function, which will allow the stove to automatically
cycle on and off based on the desired temperature set in the Temp mode.
6: Diagnosis -
This menu allows you to independently test each of the main components of the stove.
7: Safe Mode -
This menu allows technicians to bypass one or both of the internal safety switches that have the
authority to turn off the auger. (Limit and Vacuum)
8: Information -
This menu allows you to view some specific information about the stove. (Running info, Stove
info, and Wifi History)
9: Set Blower -
This menu allows the room blower fan to be toggled On or Off. (This menu is not used for our
pellet stoves, but for devices that do not use blower fans such as boilers)
10: Reset -
This menu will let you reset the programming in the panel to the stored factory defaults, and you will
lose all of your user settings.
Notice: In the event the stove loses power, a 3V CR2032 Lithium coin battery, installed in the panel, should
hold all of the user settings. Such as: Weekly schedules, Temperature units, and Time/Day
On-Board
Speaker
. This will take you
at any time to back out of
This menu allows you to alter the stove's automatic ash cleaning schedule for each
24
CR2032
Lithium
Battery
comfortbilt.net
Advertisement
Table of Contents
Troubleshooting
