Table of Contents
Advertisement
(5)
Turn off the MCC-50.
(6)
Set the rotary switch SW1 of the MCC-50 to "0," turn on the MCC-50, and check
that the settings have been correctly completed referring to "Procedure for checking
the completion of the network settings" below.
Procedure for checking the completion of the network settings (Windows)
Select [Start] > [Windows System] on the computer used for making the network settings, and start [Command Prompt].
(1)
Enter "ping (IP address of the MCC-50)," and press the [Enter] key.
(2)
Check that a response is received from the MCC-50 with the specified IP address. (Check that "Request timed out."
(3)
does not appear.)
<Ping test result (success): Response is received>
<Ping test result (fail): No response is received>
WT09836X01
26
SW1
Advertisement
Table of Contents
