Water Bypass - Eureka Forbes Aquaguard select AWS C3500 DX User Manual

TOOLS REQUIRED FOR INSTALLATION:
Two adjustable wrenches.
5/8" OD drain line is needed for the drain.

WATER BYPASS

In case of an emergency such as softener maintenance, you can isolate your water softener from
the water supply using the bypass valve located at the back of the control. In normal operation
the bypass is open with the ON/OFF knobs in line with the INLET and OUTLET pipes. To isolate the
softener, simply rotate the knobs to the BYPASS position.
You can use your water related fixtures and appliances as the water supply is bypassing the
softener. However, the water you use will be hard. To resume treated service, open the bypass valve
by rotating the knobs to SERVICE position.
Please make sure bypass knobs are completely open otherwise the unsoftened water
could bypass through the valve.
SERVICE
Sample
Connection
BYPASS NOT ALLOWED POSITION
Sample
Connection
Please make sure bypass knobs are completely
open otherwise the unsoftened water could
bypass through the valve.
BYPASS
5