Table of Contents
Advertisement
PRE-INSTALLATION INSTRUCTIONS
Contact Eureka Forbes Authorised agent to have a complete water analysis and check your water hardness
on your water supplier, this will keep your water softener in proper working.
Cold Soft Water
Hot Soft Water
Water Heater
INSTALLATION INSTRUCTIONS
DETERMINE THE CORRECT LOCATION OF THE AWS C3500 DX WATER SOFTENER.
Select the location of your softener with care. Review the various conditions below to
determine a proper location:
1. Locate as close as possible to the water supply source.
2.
3.
Softener should be located in the supply line before the water heater. Temperatures above
120°F damage softeners.
4.
Do not install the softener in a location where freezing temperatures occur. Freezing may
cause permanent damage to this type of equipment and will void the factory warranty.
5.
6. Additional plumbing is required if your water source is a community water supply, a public water supply
or you wish to bypass water used for a geothermal heat pump, lawn sprinkling, out-buildings or
high demand applications. (Refer Fig. 1)
Ground
Strap
Drain
Softener
Electrical Panel
Hard
Filtered
Water
Ground
Strap
Drain
Water Meter
Filter
Raw Water
To Outdoors
Fig. 1
4
Advertisement
Table of Contents
