Start-Up Instructions - Eureka Forbes Aquaguard select AWS C3500 DX User Manual

START-UP INSTRUCTIONS

1. Add two liters of water into the cabinet at the time of installation. This is for the unit to achieve
proper capacity in the first time of regeneration.
2. Plug the power adaptor into 220-240 VAC supply. Connect the power cord to the valve.
3. When power is supplied to the control, the screen will may display 'Advancing to Service Wait
Please' while it finds the service position
4. Manually step the valve to the Backwash position. If screen is locked, the screen will display Key
Locked, Press and Hold 'MENU' key for 3 Seconds to Unlock. Follow the instructions below to step
the valve to Backwash position. As the valve arrives at Backwash position, unplug the power and
let valve stay at Backwash position.
4.1 Press and hold MENU key for
3s to unlock.
4.2 Press and hold CONFIRM
key for 3s to advance to
MANUAL Regen menu.
4.3 Press CONFIRM key again to
let the option flash.
4.4 Press DOWN key to advance to
IMMEDIATE option.
Last Regen. : Oct. 11, 2017
Mode : Meter Delayed
Advancing to Service
Wait Please
Capacity
Remaining
Flow
Rate
01:34
Last Regen. : Oct. 11, 2017
Mode : Meter Delayed
Key Locked, Press and
Hold 'MENU' Key for 3
Capacity
Seconds to Unlock
Remaining
Flow
Rate
01:34
Manual Regen.
Last Regen. : Oct. 11, 2017
Mode : Meter Delayed
DELAY
Capacity
IMMEDIATE
Remaining
Flow
Rate
01:34
Manual Regen.
Last Regen. : Oct. 11, 2017
Mode : Meter Delayed
DELAY
Capacity
IMMEDIATE
Remaining
Flow
Rate
01:34
Manual Regen.
Last Regen. : Oct. 11, 2017
Mode : Meter Delayed
DELAY
Capacity
IMMEDIATE
Remaining
Flow
Rate
10