Eureka Forbes Aquaguard select AWS C3500 DX User Manual page 13

4.5 Press CONFIRM key to confirm
and press MENU key to have an
manual regeneration.
NOTE:
If you select 'DELAY' option, the valve will start to regenerate at the closest day's
REGEN. TIME (default is 02:00)
5. Slowly open the inlet knob on the bypass valve with the bypass tool supplied and allow water
to enter the unit. Allow all air to escape from the unit before turning the bypass fully open. Then
allow water to run to drain for 3-4 minutes or until all media fines are washed out of the conditioner
indicated by clear water in the drain hose. Open a cold soft water tap nearby and let water run a few
minutes or until the system is free of foreign material resulting from the plumbing work. Close the
water tap when water runs clean.
6. Press any button to advance to the BRINE position, when it arrives, press any key to skip the BRINE
cycle, Press any button to advance to the RINSE position. Check the drain line flow. Allow the water to
run for 3-4 minutes or until the water is clear.
7. Press any button to advance to the REFILL position. Check that the valve is filling water into the brine
tank. Allow the valve to refill for the full amount of time as displayed on the screen to insure a
brine solution for the next regeneration.
8. The valve will automatically advance to the SERVICE position. Open the outlet knob on the bypass
with the bypass tool supplied. With the bypass open, open the nearest treated water faucet and allow
the water to run until clear.
9. Add salt into the cabinet. Put 10 kgs of crystal water softener salt
in the C3500 DX softener cabinet. The unit will automatically fill the
water to the correct level when it regenerates.
10. Program unit.
CAUTION
LIQUID BRINE WILL IRRITATE EYES, SKIN AND OPEN WOUNDS - GENTLY WASH EXPOSED
AREA WITH FRESH WATER. KEEP CHILDREN AWAY FROM YOUR WATER CONDITIONER.
01:34
Manual Regen.
Last Regen. : Oct. 11, 2017
Mode : Meter Delayed
DELAY
Capacity
IMMEDIATE
Remaining
Flow
Rate
11