Related Manuals for Patriot Lighting SWANK 37591-MNDC
Summary of Contents for Patriot Lighting SWANK 37591-MNDC
- Page 1 Sku Number: 355-0718 16" SWANK FLUSH-MOUNT CEILING FAN Model Number: 37591-MNDC Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-833-695-2045, 8:30 a.m. - 5 p.m., EST, Monday - Friday.
-
Page 2: Safety Information
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate, or install the product. All set screws must be checked and retightened where necessary before installation. To reduce the risk of personal injury, do not bend the blade brackets when installing, balancing the blades, or cleaning the fan. Do not insert foreign objects in between rotating fan blades. -
Page 3: Limited Lifetime Warranty
The limited lifetime warranty covers this Ceiling Fan, for residential use by the original purchaser, against defects in material or workmanship as follows: If your Patriot Lighting Ceiling Fan motor fails at any time during the lifetime of the original purchaser due to defects in material or workmanship, we will provide a replacement part free of charge. -
Page 4: Pre-Installation
PRE-INSTALLATION PREPARATION To avoid damaging the product, assemble it on a soft, non-abrasive surface, such as carpet or cardboard. Inspect each part for defects such as the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire, do not continue the assembly process. - Page 5 ASSEMBLY INSTRUCTIONS WARNING: Turn off the power at fuse or circuit box. To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked "Acceptable for fan support of 14.5 kg (32 lbs) or less", and use mounting screws provided in assembly kit. 1.The hanging board is dismounted from the lamp body.
-
Page 6: Transmitter Specification
TRANSMITTER SPECIFICATION 7.Remove the transmitter battery back cover. 8.Install two AAA batteries, fig 1. 9.Install the battery rear cover. Fig 1 Transmitter decoding operation: Transmitter Turn on the power to turn the light on. Press the Stop (10) button within 5 seconds, after you hear the "beep"... -
Page 7: Care And Maintenance
6.light temperature + Repeat for each blade. Any measurement deviation should be within 1/8 in. Run the fan for ten minutes. If the fan continues to wobble please contact Patriot Lighting Customer Service and a 7.light temperature - balancing kit will be sent to you at no charge.