Installing The System Into A Rack; Identifying The Sections Of The Rack Rails; Installing The Inner Rails - Supero AS-1041M-T2 Plus User Manual

AS1041M-T2+ User's Manual
2-4

Installing the System into a Rack

This section provides information on installing the 1041M-T2+ into a rack unit with
the rack rails provided. If the system has already been mounted into a rack, you
can skip ahead to Sections 2-5 and 2-6.
There are a variety of rack units on the market, which may mean the assembly
procedure will differ slightly. You should also refer to the installation instructions that
came with the rack unit you are using.

Identifying the Sections of the Rack Rails

You should have received two rack rail assemblies in the rack mounting kit. Each
assembly consists of two sections: an inner fi xed chassis rail that secures directly
to the server chassis and an outer fi xed rack rail that secures directly to the rack
itself (see Figure 2-1). Two pairs of short brackets to be used on the front side of
the outer rails are also included.

Installing the Inner Rails

Figure 2-1. Identifying the Sections of the Rack Rails
(right side rail shown)
2-4