Table of Contents
Advertisement
3.
Slide the bottom tray to align it with the paper length, and lock it.
Cleaning the Autocutter
Adhesive from labels may stick to the fixed blade of the autocutter,
which may prevent the autocutter from cutting paper cleanly. If this
happens, follow the steps below to clean the autocutter.
1.
Turn off the product and disconnect the power plug from the wall
outlet.
2.
Open the roll paper cover to remove the paper.
3.
Remove the adhesive on the autocutter blade with an implement
such as a cotton swab. If necessary, moisten the cotton swab with
alcohol.
CAUTION:
Do not touch the fixed blade of the autocutter with bare hands. Doing
so may cause injury.
Fixed blade
TM-C3400Z User's Manual 29
E
Advertisement
Table of Contents
