Calibration; 10. Attributions And References - Campbell 108 Instruction Manual

Model 108 Temperature Probe
9.3

Calibration

If needed, an estimate of the interchangeability error for 0 to 50 °C, that can be
used as the Offset parameter of the Therm107() instruction, can be determined
with a 1-point or 2-point calibration. Calibration of the 108 probe is not
necessary unless the accuracy needed in the sensor data requires correction of the
thermistor interchangeability offset described in Section 6, Specifications .
(p. 4)

10. Attributions and References

Santoprene is a registered trademark of Exxon Mobile Corporation.
®
EPA installation standard: Quality Assurance Handbook for Air Pollution
Measurement Systems – Volume IV: Meteorological Measurements Version 2.0
WMO standard: WMO No. 8, Seventh edition, 6 Aug 2008 Guide to
Meteorological Instruments and Methods of Observation
11