Table of Contents
Advertisement
2.5.6
Installing an ASUS PCIE-NVME4-OCuLink card and
ASUS PCIE-NVME2-OCuLink cards
(optional for RS700-E9-RS12)
You can install an ASUS PCIE-NVME4-OCuLink card to the riser card bracket on the PCIE1
slot, and two ASUS PCIE-NVME2-OCuLink cards to the butterfly riser card bracket on the
PCIE2 slot to support eight NVME storage devices on Bay 5 to Bay 12.
To install an ASUS PCIE-NVME4-OCuLink card and ASUS PCIE-NVME2-OCuLink cards:
1.
Install an ASUS PCIE-NVME4-OCuLink card to your system. For more information,
see steps 1 to 9 in the section Installing an ASUS PCIE-NVME4-OCuLink card (for
RS700-E9-RS12 only).
2.
Connect the OCuLink cables from the ASUS PCIE-NVME4-OCuLink card to
OCUPCIE1-4 slots on the backplane. Ensure that the cables follow the path as shown
below.
OCUPCIE3: Connect OCuLink cable from OCuLink
port 3 on ASUS PCIE-NVME4-OCuLink card
OCUPCIE4: Connect OCuLink cable from OCuLink
port 4 on ASUS PCIE-NVME4-OCuLink card
2-32
OCUPCIE1: Connect OCuLink cable from OCuLink
port 1 on ASUS PCIE-NVME4-OCuLink card
OCUPCIE2: Connect OCuLink cable from OCuLink
port 2 on ASUS PCIE-NVME4-OCuLink card
Chapter 2: Hardware Information
Advertisement
Table of Contents
