Settings - Bosch SMV88TXO1A Instruction Manual

Settings

The dishwasher has been preset with
certain settings for your convenience.
You can change this factory setting.
Change the setting as follows:
Open the door.
1.
Switch on ON/OFF switch (.
2.
Press Info button { 8 for 3
3.
seconds until the following text is
indicated on the display window at
the top @:
Scroll with < >
Set with - +
Leave with Setup 3 sec.
Keep pressing button > )" until the
4.
required setting is displayed.
Setting
Time setting
Time format
Time display
Language
Rinse aid disp.
Sensor setting
Extra dry
Water connection *
Eco forecast
Auto Power Off
Emotion Light *
Front display *
Timelight *
* depending on the features of your dishwasher
Factory setting
12:00
24h
Time
English
Setting 5
Standard
Off
Cold water *
Off
after 1 min.
On
On
On
Getting to know your appliance en
Make the setting with setting buttons
5.
+ - P.
Press and hold the Info button {
6.
8 for 3 seconds.
The chosen setting has now been
stored.
You have the option of resetting all
changed settings back to the original
factory settings.
When you reset your dishwasher
Note:
to the factory settings, you are taken
directly to the settings for switching on
the appliance for the first time.
Infotext
by pressing Info button {
Set the current time.
12h or 24h.
Show end of programme with display
"Finish in" or "Finish at".
Language selection.
Amount of rinse aid affects drying. When
using Multitabs, select setting 0.
Adjustment of soiling detection for
optimum cleaning result.
Improved drying for glasses and
plasticware.
Connection to hot water (40-60°C) or cold
water (<40°C) possible. *
Show the water and energy consumption.
Appliance automatically switches off at
end of rinsing process.
Interior light.
The front display can be selected.
While programme is running, status
information is projected onto floor.
13