Table of Contents
Advertisement
en Fault, what to do?
Fault
Detergent residue.
Water stains on plastic
parts.
Washable or water-soluble
coatings in the container or
on the door.
White, stubborn coatings;
limescale on the utensils,
container or door.
38
Cause
Detergent dispenser cover 9"
blocked by utensils and therefore
does not open fully.
Detergent dispenser cover 9"
blocked by the tablet.
Tablets used in the quick or short
programme.
Dissolving time of the detergent
is not reached in the selected
short programme.
Washing effect and dissolving
performance are reduced after a
prolonged storage time or
detergent is very lumpy.
Droplet formation on plastic
surface is physically unavoidable.
After drying, water stains are
visible.
Detergent substances are
deposited. These coatings cannot
usually be removed with
chemicals (appliance cleaner, ...).
Only for glasses: Initial glass
corrosion – can only apparently
be wiped off.
Detergent substances are
deposited. These coatings cannot
usually be removed with
chemicals (appliance cleaner, ...).
Underdosing of detergent.
Too weak rinse programme
selected.
Remedial action
Utensils must not be placed above the
tablet collecting tray 1B. These may
block the lid of the detergent dispenser
and prevent it from opening fully.
~ "Upper basket" on page 17
Do not place utensils or fragrance
dispenser in the tablet collecting tray.
Tablet must be inserted flat and not
upright.
Dissolving time of tablets too long for a
quick or short programme.
Use a detergent powder or select a more
intensive programme.
Change detergent.
Use a more intensive programme (more
water changes).
Arrange utensils in a sloping position.
Use rinse aid.
Change detergent brand.
Clean appliance mechanically.
See "Glass and utensil damage"
~ Page 16.
Change detergent brand.
Clean appliance mechanically.
Increase detergent dosage or change
detergent.
Select a more intensive rinse programme.
Advertisement
Table of Contents
