Table of Contents
Advertisement
Figure 26. Removing caster wheels
Next steps
replace the caster wheels
Installing caster wheels
Prerequisites
1. Follow the safety guidelines listed in
2. Place the system on its side on a flat, stable surface.
3. If installed,
remove the system
CAUTION:
Install the caster wheels on a stand-alone tower system to provide stability to the system. An
unstable system might tip over and cause injury or damage to the system.
NOTE:
This, T series server only uses Dell caster wheels.
Steps
Align the caster wheels to the base of system and tighten the captive screw to secure the caster wheels into place.
or
install the system
feet.
Safety
instructions.
feet.
Installing and removing system components
83
Advertisement
Table of Contents
