CABINET DISASSEMBLY INSTRUCTIONS
1. Disassembly Flowchart
This flowchart indicates the disassembly steps to gain
access to item(s) to be serviced. When reassembling,
follow the steps in reverse order. Bend, route, and
dress the cables as they were originally.
[1] Top Cover
[2] Front Unit
[4] LCD CBA
[5] Front Assembly
2. Disassembly Method
ID/
Loc.
Part
Fig.
No.
No.
[1]
Top Cover
R1 2(S-1)
[2]
Front Unit
R2 *5(L-1), *CN1002
Front
[3]
R2 2(S-2)
Bracket
[4]
LCD CBA
R3 3(S-3), Volume knob
Front
[5]
R3 ----------
Assembly
2(S-4), 4(S-5), (S-6),
Receiver
[6]
R4
*4(L-2),
CBA
TR Connectors
↓
↓
↓
(1)
(2)
(3)
Note:
(1) Identification (location) No. of parts in the figures
(2) Name of the part
(3) Figure Number for reference
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to "Reference Notes."
[3] Front Bracket
[6] Receiver CBA
Removal
Remove/*Unhook/
Unlock/Release/
Note
Unplug/Desolder
---
---
---
---
---
---
↓
↓
(4)
(5)
[1] Top Cover
[3] Front Bracket
[2] Front Unit
(L-1)
CN1002
2-4-1
(S-1)
Fig. R1
(S-2)
(L-1)
Fig. R2
E61TARDC