Firmware Renewal Mode - Sylvania HT6051F Service Manual

1. Turn the power on and remove the disc.
2. To put the DVD player into version up mode, press
[9], [8], [7], [6], and [SEARCH MODE] buttons on
the remote control unit in that order.
Fig. a appears on the screen.
" ******* " differ depending on the models.
F/W Version Up Mode
Please insert a DISC
for F/W Version Up.
Fig. a Version Up Mode Screen
3. Insert the disc for version up.
4. The DVD player enters the F/W version up mode
automatically. Fig. c appears on the screen. If you
enter the F/W for different models, "Disc Error" will
appear on the screen, then the disc will be ejected
automatically.
" ******* " differ depending on the models.
F/W Version Up Mode
VERSION :
Reading...
(*1)
Fig. c Programming Mode Screen
The appearance shown in (*1) of Fig. c is
described as follows:
No. Appearance
1 Reading... Sending files into the memory
2 Erasing... Erasing previous version data
3 Programming... Writing new version data

FIRMWARE RENEWAL MODE

Model No : *******
VERSION : *.**
EXIT: POWER
Model No : *******
VERSION : *.**
************.ab6
State
5. After programming is finished, the disc will be
ejected automatically. Fig. e appears on the
screen and the checksum will be shown in (*2) of
Fig. e.
" ******* " differ depending on the models.
F/W Version Up Mode
VERSION :
Completed
SUM : 7ABC
(*2)
Fig. e Completed Program Mode Screen
At this time, no button is available.
6. Remove the disc.
7. Unplug the AC cord from the AC outlet. Then plug
it again.
8. Turn the power on by pressing the [DVD POWER]
button.
9. Press [1], [2], [3], [4], and [DISPLAY] buttons on
the remote control unit in that order.
Fig. g appears on the screen.
" ******* " differ depending on the models.
MODEL : *******
Version : *.**
Region : *
EEPROM CLEAR : CLEAR
10. Press [CLEAR] button on the remote control unit.
Fig. h appears on the screen.
" ******* " differ depending on the models.
MODEL : *******
Version : *.**
Region : *
EEPROM CLEAR : OK
EEPROM CLEAR : CLEAR
When "OK" appears on the screen, the factory
default will be set. Then the firmware renewal
mode is complete.
11. To exit this mode, press [DVD POWER] button.
1-7-1
Model No : *******
VERSION : *.**
************.ab6
EXIT: POWER
Fig. g
EXIT: POWER
Fig. h
E61TAFW