Cabinet Disassembly Instructions - Sylvania HT6051F Service Manual

CABINET DISASSEMBLY INSTRUCTIONS

1. Disassembly Flowchart
This flowchart indicates the disassembly steps to gain
access to item(s) to be serviced. When reassembling,
follow the steps in reverse order. Bend, route, and
dress the cables as they were originally.
[1] Top Cover
[3] Front Assembly
[4] Reinforce Plate
[6] DVD Main CBA Unit
[7] DVD Mechanism
[8] AV CBA
[2] Bottom Cover
[5] Front Bracket
1-5-1
2. Disassembly Method
ID/
Loc. Part
Fig.
No.
No.
[1] Top Cover D1 2(S-1)
Bottom
[2] D1 2(S-2)
Cover
Front
[3] D2 *6(L-1)
Assembly
Reinforce
[4] D2 2(S-3)
Plate
Front
[5] D2 2(S-4)
Bracket
(S-5A), (S-5B),
DVD Main *CN201, *CN301,
[6] D3
CBA Unit *CN401, *CN601,
*CN801
DVD
[7] D3 4(S-6)
Mechanism
(S-7),2(S-8), *3(L-2),
[8] AV CBA D4
TR Connectors
↓ ↓ ↓
(1) (2) (3)
Note:
(1) Identification (location) No. of parts in the figures
(2) Name of the part
(3) Figure Number for reference
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to "Reference Notes."
About tightening screws
When tightening screws, tighten them with the
following torque.
Screws
(S-1), (S-2), (S-3), (S-4),
(S-5A), (S-6), (S-7), (S-8)
(S-5B)
Removal
Remove/*Unhook/
Unlock/Release/ Note
Unplug/Desolder
---
---
---
---
---
1
2
---
↓ ↓
(4) (5)
Torque
0.45 ± 0.05 N·m
0.38 ± 0.04 N·m
E61TADC