Cabinet Disassembly Instructions - Sylvania DVL1000F Service Manual

CABINET DISASSEMBLY INSTRUCTIONS

1. Disassembly Flowchart
This flowchart indicates the disassembly steps to gain
access to item(s) to be serviced. When reassembling,
follow the steps in reverse order. Bend, route, and
dress the cables as they were originally.
[1] Top Cover
[2] Tray Panel
[3] Front Unit
[7] Rear Panel [8] DVD Main CBA Unit
[9] DVD Mechanism
[10] AV CBA
[11] Loader Base [12] Main PCB Holder
2. Disassembly Method
ID/
Loc. Part
Fig.
No.
No.
[1] Top Cover D1 5(S-1)
[2] Tray Panel D2 *2(L-1)
*2(L-2), *2(L-3),
[3] Front Unit D2 *3(L-4), *CN2001,
*CN2004
[4] LED CBA D3 2(S-2)
Function
[5] D3 3(S-3)
CBA
Front
[6] D3 ----------
Assembly
[7] Rear Panel D4 5(S-4), (S-5), (S-6)
2(S-7A), (S-7B),
DVD Main
[8] D5 *CN201, *CN301,
CBA Unit
*CN401, *CN601
DVD D5
[9] 4(S-8)
Mechanism D6
[10] AV CBA D7 4(S-9), (S-10)
Loader
[11] D8 4(S-11)
Base
[4] LED CBA
[5] Function CBA
[6] Front Assembly
Removal
Remove/*Unhook/
Unlock/Release/ Note
Unplug/Desolder
---
1
1
---
---
---
---
2
2
3
---
---
ID/
Loc. Part
No.
Main PCB
[12]
Holder
↓ ↓
(1) (2)
Note:
(1) Identification (location) No. of parts in the figures
(2) Name of the part
(3) Figure Number for reference
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to "Reference Notes."
About tightening screws
When tightening screws, tighten them with the
following torque.
Screws
(S-1), (S-2), (S-3), (S-4),
(S-5), (S-6), (S-7A), (S-8),
(S-9), (S-10), (S-11),
(S-12)
(S-7B)
1-5-1
Removal
Remove/*Unhook/
Fig.
Unlock/Release/
No.
Unplug/Desolder
D8 (S-12)
↓ ↓
(3) (4)
Torque
0.45 ± 0.05 N·m
0.38 ± 0.04 N·m
E61J0DC
Note
---
↓
(5)