Table of Contents
Advertisement
Spectrometer
User Manual
9.2.3 Measurement Settings
The following parameters can be controlled from this area:
(I) Trigger
There are 3 trigger modes available: internal trigger, external trigger and rolling integration. See
Section 9.4 for a description of these modes.
(II) Measurement
There are 3 measurement types available. See section Section 9.3 for a full description of these.
9.2.4 Plot properties
Used to customise the appearance of the plot(s) and enable/disable peak detection features.
(I) Peaks
Displays detected peak positions on the currently selected spectrum.
(II) Widths
Displays detected peak widths on the currently selected spectrum.
(III) Autorange
Automatically scales the y-axis to display the entirety of the currently selected spectrum.
(IV) Spectrum Colour
Shows a colour palette fill under the currently selected spectrum, representing an approximation
of the colour of light at each wavelength.
(V) Grid
Adds a grid to the plot background.
9.2.5 Cursor
Displays the current cursor (wavelength and intensity) position on the plot.
9.2.6 Spectra Workspace
The current spectrum and any pinned spectra will be visible in this workspace. New spectra are
unpinned by default (unless the 'Pin new spectra' button
is active), meaning that subsequent
www.ossila.com
18
Ossila Limited © 2023
Advertisement
Table of Contents
