Table of Contents
Advertisement
Spectrometer
(IV) Tools
Calibrate Using Selected Spectrum – Transfer the selected spectrum into the calibration
•
window. See Section 9.5 for details.
Find Peak Parameters – Open dialog box to set parameters related to peak detection. See
•
Section 9.6 for details.
(V) View
Toggle Dark Theme – Change the software theme to dark mode. Useful for minimising
•
computer screen light for sensitive measurements.
Show Frames Per Second – If enabled, the rate at which spectra are being read from the
•
spectrometer is shown in the status bar. Additional processing of spectra, such as peak
detection, can reduce the frame rate.
Scroll to Most Recent Spectrum – When enabled, the workspace will automatically scroll
•
to a newly recorded spectrum. When disabled, the workspace can be scrolled (if enough
spectra are present in the workspace) so that previously recorded spectra can be
check/unchecked while an acquisition is in progress.
Figure 9.4. Software window with the standard theme (left) and dark theme (right).
www.ossila.com
16
User Manual
Ossila Limited © 2023
Advertisement
Table of Contents
