Table of Contents
Advertisement
OZONE SOLUTIONS
II. COMPONENTS
DIAGRAM
DESCRIPTION
1. Timer: The timer acts as the on/off switch for the
system. It can be set to various timing options as
well as a "hold" setting.
III. INSTALLATION & OPERATION
REQUIREMENTS
Location
This oxygen concentration system is not weather proof;
therefore, a dust-free, indoor environment is required
for operation. All components must be accessible for
future maintenance and service.
If mounting the machine, ensure the wall or support
system can withstand the weight of the unit. There are
tabs located at the top of the machine and mounting
feet on the bottom.
6
/
DR SERIES
1
3
2
2. Power Cord
3. Inlet Filter
4. Ozone Out Port
Temperature & Humidity
Water must not be allowed to condense in or on
the machine. For best performance, the operating
temperature should be between 40ºF and 95ºF with
a maximum relative humidity of 60%. The storage
temperature should be between -20ºF and 170ºF.
4
4
Advertisement
Table of Contents
