Temperature Control And Adjustment; Troubleshooting - Danfoss living connect Installation And User Manual

4. Temperature control and adjustment

The temperature is usually
controlled via Danfoss Link
UK
but may be changed at any time
using the thermostat's buttons. If
TR
this is done, the thermostat sends
a message to Danfoss Link
SI
instructing it to synchronise the
HR other thermostats in the room.
The change only remains in effect
until the next programmed period.
Temperature range 4-28°C

5. Troubleshooting

Error code
E1
E2
E3
Antenna
and alarm
bell sym-
bol flash
together
16
Error
Transmitter failure. Contact your local service technician.
Malfunction in thermostat's front temperature sensor.
Contact your local service technician.
Malfunction in thermostat's rear temperature sensor.
Contact your local service technician.
No connection to Danfoss Link
instructions at www.danfoss.com/living.
CC,
TM
18
19
20
21
CC,
TM
Press
temperature.
CC, follow the
TM
26
25
24
23
to change the
living connect®