Table of Contents
Advertisement
connect to the main power supply
1. If the cable is damaged or needs replacing, this should be done by an
after-sales technician using the proper tools, so as to avoid any accidents.
2. If the appliance is being connected directly to the mains supply, an omnipolar
circuit breaker must be installed with a minimum gap of 3mm between the
contacts.
3. The installer must ensure that the correct electrical connection has been made
and that it complies with safety regulations.
4. The cable must not be bent or compressed.
5. The cable must be checked regularly and only replaced by a properly qualified
person.
The ceramic cooker hob appearance
Glass plate
ON/OFF
N2
N1
L2
PE
220-240V
220-240V
220-240V 2+2N~
1
2
L1
PE
connect to the main power supply
Figure (3)
4
3
4
N
L
220-240V
220-240V~
Control panel
Advertisement
Table of Contents
